Edifier have created perfect budget desktop speakers M60 review

I wanted to buy some cheap desktop alternatives for my work desk as a way to see what's up with the cheaper speaker market. I tested a few, and none of them grabbed me enough to make a review. They were okay, even good. For someone that hunts for cheap speakers in this price range, they would be enough.

But my audiophile heart wanted a speaker that at least sounded a bit HIFI, so I could say, "Well, those are some great speakers in this price range." And did I find an amazing choice that is cheap, has a very compact footprint, and yet sounds great.

Specs/Features/App/Stands

Of course, you clicked on the title of this video; you know I'm speaking about the Edifier M60. These are desktop speakers with a 24-bit DAC integrated that will satisfy every budget-conscious audio lover.

They are equipped with so much talent inside. You have Class D Texas Instruments amplification inside with 66W, which allows these speakers to have deep bass and volume in sound.

That is, of course, helped by 1-inch silk dome tweeters and 3-inch mid-low drivers, which, again, with their 3-inch mid-low drivers, is exceptional in this price range.

There is full digital signal processing with a two-way active crossover and DRC with 24-bit 96kHz digital-to-analog processing. This means that streaming quality files significantly improves the sound with these speakers.

Connectivity is okay; you have three ways to connect your speakers to a source: via Bluetooth, via Aux, and USB-C. For most, this is great, but I wish there was an optical or coaxial input that would help with a larger variety of HIFI gear. One interesting thing, which I think is great and not so great, is that you connect the speakers with a DIN cable. DIN cables are great and offer a big bandwidth. But then again, I see a lot of people complain that they cannot connect the speakers together via Bluetooth for more convenience. Of course, the audio quality degrades that way, but it would be good if it had such versatility.

And while we are on the subject of Bluetooth, it is not APTX but LDAC. Whether that is a good or bad choice, I don't know, but Edifier claims that LDAC allows, when streamed from an Android device, to preserve the quality of the file with minimal loss. That is a big claim, and I can tell you that it sounds great via Bluetooth, but personally, I rarely listen to music that way, so I could not give you more.

You also get speaker stands, which again adds so much value, and a companion application. Both of them are awesome, but I will speak more about them in the review later.

The thing is that I don't like the top-mounted touch panel. It is a nice visual touch; you turn the speakers on and off, you can change the source, and adjust the volume. But I am a bit old-school and still prefer physical buttons, or at least a remote. Somehow, when I get used to the physical layout and haptic feeling of a physical button, I interact with the device more easily. I had no practicality with this; I always had to look directly at the speakers to know what I was clicking, and having no feedback is a bit awkward.It would help to have remote, but Applications does everything remote would. But then again you have to have your mobile always with you for that.

One thing I really missed, and that is sub out. I think if it had sub out, it would bring more versatility to these speakers.

Instant improvement for this speakers

Before going into sound quality, I want quickly to go through two cheap ways that you can massively improve your sound.

First, the aux and RCA cables you get with these speakers are super cheap; they are there so you would be able to connect right away and enjoy music. But buying better cables could unlock your music so much, especially if you stream and listen to those more quality files.

There are cables up to 20 euros, from the likes of QED, Audioquest, etc., which will unlock your speakers like you would not believe it. It is a simple thing and works great.

The other thing is sound isolator buffers. You can get them from 10 to 30 euros on Amazon. For me, this was necessary, but it will depend on the situation.

While they have nice build quality, it is that when you have a small box and a bigger bass reflex, it cannot contain vibration so well. It does shake, and in the process, it does create a bigger unfocused bass. So it did rumble at my desk a bit, and especially when they are on stands, and bass fires directly at the table. The bass was bouncy, unfocused, and too big. I had a bunch of problems. Of course, this all depends on your table, or are they on the stands or shelf. Maybe you will not have this problem.

But I had that problem, and those small absorbers on which you put the speaker on, helped so much by making the sound more clear.

Sound Quality

But the reason why the title of this video goes like this is exactly because of this, the sound quality. These speakers are so close to being High Fidelity speakers that it is incredible.

But stop there, audiophile snob, what are these high fidelity speakers you speak about!

Well, I don't have a great answer here. But this is how I perceive all the situation. If speakers allow me to hear individual layers and instruments on the soundstage, if it can take high fidelity files and make them more clear and open, to me, HIFI is always about separation and liberation of instruments on the soundstage, rather than one big wavelength of sound.

And these speakers do provide that. Its separation on the frequency scale is really great. I could definitely see and hear percussions in treble being nicely separated by the tweeter. Each kick, synth, and voice have their lane.

The detail and texture are there. While not impressive in sight, it did play with the notion of having some details to explain the production and properties of sound.

Also, imaging or placing of vocals on the soundstage was good. I tend to separate them 1 meter between them and toe them in a little bit for best results.

And all of that as these speakers are nicely clean and organized. And this can be even more improved if you add some decent DAC into the story. The inside DAC is great for what it does.It helps with better files to make your speaker sound better. But a much better external DAC will do that 2-3x better into spreading your speakers in more directions.

I think these poor a lot of my praise of details is that it truly compactualizes music in different sectors, leaving room for breath and transparency. And that clarity is a might thing, more might than more decibels in bass or treble, as it helps you appreciate and follow instruments and vocals on soundstage.

And bass, while this will not be your 2.1 system quality and reach of bass. What inner bass ports do for the sound here is great. Bass is full and detailed. It gives music more of a pulsing ability, great for listening to rock, or any music that requires that drive and agility. It complements the sound all around. Even though at some times it might be a bit too much.

And a good thing about that is that there is an Edifier app, that allows you to equalize everything you do not like about the sound in -3 to +3 decibels. So if you think the bass needs more control, as I do, just remove a few decibels from it, to get a more balanced sound, the one I like more.

Now for alternatives, I don't know in exact this price range. But there are two which are a bit more expensive that we can do a comparison. Those two are Audioengine A2+ and Kanto YU2. Both of them are around 150 dollars more expensive and let's talk about what you get and what not with them.

vs. Audioengine A2+

This is, and has been my desktop speakers for a long time. It has this small footprint, which I like as my table is small. So something like A5+ is a bit too much.

There are two points that you get with Audioengine which will dictate if an additional 150 is worth it. You get a bit better DAC, which is just a bit better in organizing stuff on soundstage adding a bit more height and width and space. And more insight into those bass and treble. Which means more details.

Now this is important while I think it is more, it is not sun and moon in differences. It adds more, it is a better sonic quality. But not a 150 difference, it is just you get a more mature and better sound with Audioengine.

But one thing interesting, is that I felt personally that Edifier had a more bigger, more commanding bass than Audioengine. It truly did, and it felt more commanding, more full, more fun to listen with some certain songs.

But there is one big problem with audioengine, it is a speaker that time has run over. It is a 33w class A/B drivers inside that shows its teeth when you put it in more strenuous situations.

If you use it as nearfield speakers with decent current and signal they do fine. In all other scenarios it quickly jumps from class A to class B, and if you are streaming from TV which signal is a bit lower, and you need a certain volume to cover that up, some significant distortion will appear quick. And degradation in sound quality.

This is something to be wary of. I like them only as nearfield desktop speakers that are close to you.All other scenarios are off the table with these speakers, as the amp inside them is not that good.

vs. Kanto Yu/Yu2

But this one is really good. You can pick Yu or Yu2, but I will focus on Yu1. It is an incredible 150W class D amp inside. It is a better sounding speaker all around. Maybe they are a bit bigger, so something like YU2 might be more for you.

But you truly get more sonic quality in every facet. From treble, mids, and bass there is a bit more push, energy, and detail.

But also you get a sub out, to improve the bass with the addition of a subwoofer. You get speaker line in to add additional amplification, and you get typical RCA and Bluetooth.

So you can always see these speakers as modular ones, as you can add a DAC, amp, or subwoofer to enhance the experience, which is something that can hold a lot of value in itself.

After the Edifier, I think Yu and YU2 hold great value, but you have to add an additional 150 euros, and for some, Edifier will do a great job, so they will have no need to upgrade.

Expensive alternatives

So if you want to know, there is one deck Expensive alternatives

So if you want to know, there is one desktop speaker that I think is at the peak of quality and value, ;nd that is Ruark MR1 Mk3, it is 300 euros more expensive. But trust me, it is a great HIFI desktop speaker that just sounds amazing and has a small footprint. Another choice would be Q Acoustics M20, which are also a great choice.

And of course, now legendary KEF LSX II, but that one is almost 10x the Edifier price.

Perfect budget speakers/Conclusion

It is a 100 euro speaker that delivers impossible value. Quality great sound, great materials, quality, and looks. Decent app with equalizations. Honestly, I don't know what more to ask.

It overdelivers in its price range, and I don't know if there is really a person I cannot recommend this to. They are also small and will fit your table really easily.

I miss a bit more flexibility in inputs and outputs, like sub out, coaxial and optical in, etc. But what you lose there, you get in great sonic quality, and that is the most important thing

✅ Pros

Value & Price

• Exceptional value for ~100 euros — delivers sound quality far above its price point.

• Perfect for budget-conscious audiophiles seeking a compact HiFi-like experience.

  
  

Sound Quality

• Great separation and imaging — instruments and vocals are clearly layered and well-placed.

• Impressive clarity and transparency — allows users to follow instruments individually.

• Balanced and full bass — energetic and detailed, good for rock and energetic genres.

• High-quality DAC (24-bit/96kHz) — enhances clarity when using high-quality audio files.

• Good frequency response — especially strong treble performance via silk dome tweeters.

• Volume and dynamics are solid thanks to 66W Class D Texas Instruments amp.

Features & Connectivity

• Bluetooth with LDAC support — high-quality wireless audio (especially on Android).

• USB-C, AUX, and Bluetooth inputs — flexible enough for most users.

• Digital signal processing and active crossover — contributes to clean sound.

• Included speaker stands — practical value-add for desktop setups.

• Edifier app — allows basic EQ adjustments and replaces the need for a remote.

Build & Form Factor

• Compact footprint — perfect for limited desk space.

• Nice materials and aesthetics — visually appealing and well-built.

• Good included app and hardware bundle — including stands and basic cables.

❌ Cons

Connectivity Limitations

• No subwoofer output — limits bass expansion for users who want more low-end.

• No optical or coaxial inputs — reduces compatibility with some HiFi gear.

• Proprietary DIN cable — reliable but not user-friendly for people wanting wireless stereo.

  
  

Controls

• Touch panel controls — no haptic feedback, awkward to use without direct visual contact.

• No physical buttons or remote — usability could suffer for some; app is the only alternative.

  
  

Accessories Quality

• Included AUX and RCA cables are low quality — upgrading them noticeably improves sound.

• Lack of vibration damping — bass can become bloated or unfocused unless isolation pads are added

  
  

Bluetooth Trade-offs

• No aptX support — LDAC is good, but not all devices support it.

• Speakers can’t wirelessly pair together — limits true wireless stereo setup.